Bay Networks NauticaRS Reference Manual page 86

NauticaRS 5.5R Reference Guide
2-14
For example, to move into the Radius class and view the radius
object settings, from the bcc> mode the following is typed:
co ra
bcc>
co moves you into config mode from the bcc> mode and ra takes
you to the radius# object.
If you are already in config mode (a # symbol is displayed at the
end of the prompt), there is no need to use the co MTD to move to
an object.
For example, to move into the radius# object from the bcc>
prompt, and then into the ip# object, the following is typed:
co ra
bcc>
ip
radius#
ip#
In this example, co ra moves the BCC out of the bcc> mode into
config mode and then into the radius# class.
At the radius# prompt, the ip command tells the BCC to move out
of the radius# class and into the ip# class.
Classes and objects are discussed in more detail through the rest
of this manual. Table 2-2
mode.
displays the hierarchy of the config
117237-E Rev.00