NauticaRS 5.5R Reference Guide
Device Statistics
6-80
The activity of a device can be displayed on the screen. From any
configuration prompt use the following syntax:
[co] sh dev type/name
Where co takes the unit into config mode (if necessary), sh dev
tells the BCC to display device statistics, type is the type of
device and name is the name of the device (as shown when ls -l is
typed at the box# prompt).
To display the information on a LAN port, the following would be
typed:
box# sh dev eth/LAN01
The information as shown here appears on the screen:
Name :LAN01
MAC Address:002062020327
Rx Errors :0
Rx Bytes:23355745
Rx Frames:23161
Rx Utilization :5
Rx Broadcasts:345
Rx Multicasts:352
Tx Errors:0
Tx Bytes:3764024
Tx Frames:13054
Tx Utilization:6
Tx Broadcasts:168
Tx Multicasts:168
117237-E Rev.00