117237-E Rev.00
To create or modify a filter use the following syntax:
[co] ipx [mod|new] filt filter-name
where co moves the BCC into config mode (if required), ipx takes
the router to the ipx# object prompt, mod and new are the modify
and new verbs (optional), filt is the MTD for the filter# object and
filter-name is the name of the filter being edited or created.
When this command is entered, the BCC moves into the new
configured object:
filter/name#
Typing i at this prompt lists all the Packet Filter attributes. In the
table below, click on the attribute for which you require further
assistance.
name
anet
asock
bnet
bsock
Using IPX
10-17