Bay Networks NauticaRS Reference Manual page 184

NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Parameter:
MTC:
Default:
Options:
Function:
6-38
mode
mode
pri
pri, fractional
The type of connection. PRI, the default, is used for
standard PRI ISDN switched circuits. The other option is
Fractional (page 6-45).
Setting this option to Fractional will remove the D
channel and allow the ISDN line to work like a leased
line to specific destinations set up by the service
provider at the time of installation.
SwitchType
sw
natisdn2
natisdn 2, at&tcustom, at&tcustomptp and nortel dms
The switch type used at the telephone company's local
central office: a switch type should only be entered here
if ISDN interface modules with North American ISDN
support are installed.
numofchans
nu
30
A valid number of channels equal to or less than the
number of keyed channels.
Sets the number of channels in use by the router. This
should match the number of channels supplied by your
service provider.
117237-E Rev.00