Creating A Path And Route To The Isp; Table 20-2. Ppp Isp Path Parameters - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

Creating a Path and Route to the ISP

20-14
Since IP information is received from the ISP via NAT, a PPP
path and route need to be created to the ISP. Give the path a name
you will recognise. For details on creating a PPP path, refer to
page 7-17 of this manual.
Table 20-2 shows the parameters that should be set whn the path
is created:
Table 20-2.
Parameter (MTD)
isdn-n 1
auth-name
chapo
chapi
auth-call
ipad
nat-en
A default IP route also needs to be created:
box# ip ro s/0.0.0.0/0/pathname
Where pathname is the name given to the PPP path created to
reach the ISP.
PPP ISP Path Parameters
Value
Number needed to reach the ISP
Account name from the ISP
Outgoing CHAP secret
Incoming CHAP secret
no
IP address of the ISP
yes
117237-E Rev.00