Bay Networks NauticaRS Reference Manual page 265

Parameter:
Default:
Options:
Function:
Instructions:
Parameter:
Default:
Options:
Function:
Parameter:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
hifnlzs-checkmode
extmode
extmode, nocheck, seqnum
If StacLZ is selected as the compression type, a
checkmode (error correction) must also be selected here.
The three values are as follows:
• Seqnum: The unit will request packets to reset
histories.
• Extmode: A flag is set at the beginning of the
packet to reset histories which extends the packet.
• NoCheck: No error checking applied.
wcp version
11
11, 12
The version of the BayRS software on the remote Bay
Networks router at the end of the path.
wcp level
Port
Path, Port
Specifies how the compression is to be applied.
There are two values that can be set for this parameter:
• Port: Compresses data on the individual ISDN
ports. If two ports are in use then two compression
engines will be used (not on the Nautica 200). This
can reduce the amount of available memory in the
unit.
• Path: Only one compression engine is used for each
path no matter how many ports are in use. The calls
on the ports are treated as a bundle.
Working with Paths
7-37