Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
enable
en
yes
yes, no
Allows or disallows the operation of this path.
The values are:
•
Yes: The path is available for operation.
•
No: The path is not in operation.
autocall-period
au
0
Enter a time in seconds
This is the time (in seconds) between automatic calls
along this path.
Enter an autocall period.
ospf-support
ospf-s
none
none, ospf2
Allows or disallows OSPF.
If OSPF is to be used on this router then change this
parameter to OSPF2. For a description of OSPF refer to
Chapter 1. For setup information, refer to Chapter 18.
Working with Paths
7-29