Configuring SNMP Settings
Setting
Enable SNMP
Community Name
From the AWI SNMP page as shown next, you can enable or disable the device's SNMP agent.
AWI SNMP page
Information: PCoIP SNMP Agent
For more information on using the PCoIP SNMP Agent, see Using
To configure SNMP settings:
1. From the AWI, select Configuration > SNMP.
2. From the AWI SNMP page, do the following:
• Select or clear the Enable SNMP check box. When enabled, the device enables the PCoIP
SNMP agent to respond to SNMP requests. Disabling the SNMP agent prevents it from
© 2020 Teradici
Configuring SNMP Settings
Default
AWI
OSD
Disabled
public
Management Console
SNMP with a PCoIP® Device User
Guide.
301