Wacom Cintiq Pro 32 Manual page 140

Parameter
DNS Name or
IP Address
Logon
Username
Logon
Password
Logon Domain
Name
Pool Name to
Select
Port
Certificate
Check Mode
Certificate
Check Mode
Lockout
Trusted View
Connection
Servers
© 2020 Teradici
AWI: View Connection Server + Auto-Logon Session Settings
Description
Enter the View Connection Server's DNS name or IP address. For VMware Horizon DaaS, this is
the DNS name or IP address of the VMware Horizon DaaS Desktop Portal.
Enter the user name for the client (maximum number of characters is 128). This user name will
be sent to the specified connection server.
Enter the password for the client (maximum number of characters is 128). This password will be
sent to the specified connection server.
Enter the domain for the client (maximum number of characters is 256). This domain will be
sent to the specified connection server.
Enter the pool name. When the list includes a pool with this name, the client will immediately
start a session with that pool.
This field is case-insensitive. For Tera1 PCoIP Zero Clients, this parameter is called Desktop
Name to Select.
By default, port 443 is used to communicate with the connection server. If your network is set up
to use a non-standard port for secure connections, enter the port number.
Select the level of verification performed on the certificate presented by the connection server:
• Never connect to untrusted servers: Configure the client to reject the connection if a trusted,
valid certificate is not installed. (This is the most secure option.)
• Warn before connecting to untrusted servers: Configure the client to display a warning if an
unsigned or expired certificate is encountered, or if the certificate is not self-signed and the
Tera2 PCoIP Zero Client trust store is empty. (This option is selected by default.)
• Do not verify server identity certificates: Configure the client to enable all connections. (This
option is not secure.)
When enabled, prevents users from changing the Certificate Check Mode settings from the OSD or
AWI.
Click the Show button to display View Connection Servers for which the client has received a
valid certificate.
Click the Clear button to clear this cache.
140