Wacom Cintiq Pro 32 Manual page 447

4. Select Direct from Client for session connection type and select Show Advanced Options.
5. Select Suite B: TLS 1.2 with Suite B-compliant 192-bit elliptic curve encryption for TLS Security
Mode parameter.
6. Select the correct Server certificate for the Peer-to-Peer Certificate parameter.
Zero Client Configuration
1. Login to the Zero Client AWI.
2. Browse to Upload > Certificate and Upload both the issuer (example_suite_b_root_ca_cert.pem)
and client (example_suite_b_client.pem) certificates.
3. Browse to Configuration > Session.
4. Select Direct to Host for the Session Connection Type and enter the IP address of the Remote
Workstation Card that you are connecting to for the DNS Name or IP Address parameter.
5. Select Show Advanced Options and select Suite B: TLS 1.2 with Suite B-compliant 192-bit elliptic
curve encryption for the TLS Security Mode parameter.
6. Select the correct Client certificate for the Peer-to-Peer Certificate parameter.
7. From the OSD connect to your Remote Workstation Card.

Note
If a custom peer to peer certificate is applied and a connection is made, and the custom certificates is removed from
the certificate store on either device, a subsequent connection will not establish.
© 2020 Teradici
Server Certificate Specific Requirements
447