Enable Attached
Display Override
© 2020 Teradici
Configuring Display Override Settings
This option is intended for legacy systems. It configures the Tera2 PCoIP Zero Client to
send default EDID information to the host when a monitor cannot be detected or is not
attached to the client. For Windows versions earlier than Windows 7, if the host didn't
have EDID information, it would assume no monitors were attached. This option ensures
that the host always has EDID information when the client is in a session.
The following default resolutions are advertised when this option is enabled:
• 3840x1440 @60 Hz
• 3840x2160 @30 Hz
• 3840x2160 @25 Hz
• 3840x2160 @24 Hz
• 2560x1600 @60 Hz
• 2560x1440 @60 Hz
• 2560x1080 @60 Hz
• 2048x1152 @60 Hz
• 1920x1440 @60 Hz
• 1920x1200 @60 Hz
• 1920x1080 @60 Hz
• 1856x1392 @60 Hz
• 1792x1344 @60 Hz
• 1680x1050 @60 Hz
• 1600x1200 @60 Hz
• 1600x900 @60 Hz
• 1440x900 @60 Hz
• 1400x1050 @60 Hz
• 1366x768 @60 Hz
• 1360x768 @60 Hz
• 1280x1024 @60 Hz
• 1280x960 @60 Hz
• 1280x800 @60 Hz
• 1280x768 @60 Hz
• 1280x720 @60 Hz
• 1024x768 @60 Hz
• 848x480 @60 Hz
• 800x600 @60 Hz
• 640x480 @60 Hz
357