2. From the AWI Event Log page, you can:
• Select or clear the Enable Event Log check box.
• View all the event log messages stored on the Tera2 PCoIP Zero Client.
• Press
F5
• Click Clear to delete all the event log messages stored on the Tera2 PCoIP Zero Client.
• In the Syslog section, enable and configure syslog settings.
More information on configuring syslog
For detailed instructions on configuring syslog settings, see
• In the Enhanced Logging Mode section, enable specific enhanced logging mode
categories.
3. Click Apply.
© 2020 Teradici
Performing Logging Tasks from the AWI
to refresh the browser page displaying the log information.
Configuring the Event Log and
Syslog.
372