Wacom Cintiq Pro 32 Manual page 233

Configuring the Tera2 PCoIP Zero Client to Automatically Log into a Host Brokered by a Connection Manager
2. Log into the Tera2 PCoIP Zero Client AWI.
3. From the AWI Info menu, click Attached Devices. The Attached Devices page displays (as
shown next), showing the PID and VID information.
VID and PID numbers
Write down the PID and the VID information. From the Permissions menu, click USB to display
the USB permissions page. In the Bridged Devices section, click Add New. Enter the Vendor ID
and Product ID for the touch screen (as shown next), and then click Add.
USB permissions page
Restart the Tera2 PCoIP Zero Client session. Install the touch screen driver from Elo
TouchSystems. See the Elo TouchSystems documentation for installation and calibration
instructions.
Configuring the Tera2 PCoIP Zero Client to Automatically Log
into a Host Brokered by a Connection Manager
To make logging into the touch screen device easier, you can configure auto-logon to bypass the
keyboard when using a broker as a connection manager.
If you choose to set this up, users simply need to touch Connect at the Login window instead of
also having to enter their login credentials.
To configure the Tera2 PCoIP Zero Client to automatically log into a host brokered by a connection manager:
1. Log into the AWI for the Tera2 PCoIP Zero Client.
2. From the Configuration menu, select Session.
3. In the Session Connection Type drop-down menu, select PCoIP Connection Manager + Auto-
Logon or View Connection Server + Auto-Logon, depending on the connection server you're
using.
4. Enter the connection server's DNS name or IP address.
5. Complete the user credentials, and then click Apply.
© 2020 Teradici 233