Wacom Cintiq Pro 32 Manual page 142

Parameter
Enable
Preparing
Desktop
Overlay
Enable Session
Disconnect
Hotkey
Enable RDS
Application
Access
PCoIP Utility
Bar Mode
© 2020 Teradici
AWI: View Connection Server + Auto-Logon Session Settings
Description
When enabled, the 'Preparing Desktop' overlay appears on the display(s) when users log in.
This overlay provides assurance that login is proceeding if the desktop takes more than a few
seconds to appear.
When enabled, users can press the
Client Control Panel' overlay, which lets them disconnect the current session on the workstation
or power off the workstation.
Before users can use this disconnect hotkey sequence, certain other configuration options must
be in place. See Disconnecting from a Session for details.
When enabled and users connect to a VMware Horizon View Connection Server that offers
applications, a list of available applications will be presented.
Applications open in full-screen mode, but can be re-sized once users are in session.
When enabled, the PCoIP Utility Bar appears at the top of the primary display when a user is in
session and moves the cursor directly under the bar. The utility bar can be used to disconnect a
session or to shut down a remote workstation. For Direct to Host session connection types,
Cursor and Keyboard must be enabled in order for the Tera2 PCoIP Zero Client to process
mouse events for the utility bar. For all connection types, the mouse must be locally connected
(that is, not bridged).
• Disabled: Disables the PCoIP Utility Bar. By default, the utility bar is disabled.
• Enabled: Enables and auto-hides the PCoIP Utility Bar. Users can show the utility bar by
pointing the mouse at the top of the screen directly under the utility bar. Users can slide the
utility bar to the right and left at the top of the screen.
• Enabled and Pinned: Enables and pins the PCoIP Utility Bar at the top of the screen. Users
cannot hide the utility bar, but they can slide it to the right and left at the top of the screen.
This feature is configurable from the PCoIP Management Console and AWI only. It requires
firmware version 4.2.0 or higher.
+ + hotkey sequence to pop up the 'Zero
Ctrl Alt F12
Local
142