Table of Contents
Advertisement
USB Bridged Parameters
The following parameters display when you add a new USB bridged entry:
USB Bridged Devices Parameters
Parameter
Description
Vendor ID
Enter the vendor ID of the bridged device. The valid range is hexadecimal 0-FFFF.
Protocol ID
Enter the product ID of the bridged device. The valid range is hexadecimal 0-FFFF.
To configure USB permissions from the AWI:
1. From the AWI, select Configuration > USB.
2. From the AWI USB page, update the USB permissions.
3. Click Apply.
© 2020 Teradici
Configuring USB Permissions from the AWI
309
Advertisement
Table of Contents
