Wacom Cintiq Pro 32 Manual page 350

e. Click Finish, and then click OK.
8. Repeat Steps 5 to 7 again to export the Tera2 PCoIP Zero Client certificate, but this time
without the private key (No, do not export the private key), selecting the DER encoded binary X.509
(.CER) format instead of the PKCS format.
9. Save this
.cer
imported into Active Directory.
Convert the Certificate Format from .pfx to .pem
Using OpenSSL, convert the certificate format from .pfx to .pem.
To convert the certificate format from .pfx to .pem:
1. Download and install Windows OpenSSL from
Win32OpenSSL.html. (The light version is sufficient.)
2. Copy the .pfx client certificate file you saved above to the
3. Open a command prompt window, and enter the following command to convert the certificate
format from .pfx to .pem:
<client_cert>.pfx ‑out <client_cert>.pem ‑nodes
certificate file you saved to your local machine.
4. When prompted, enter the password for the certificate file.
5. At the command prompt, enter the following command to create an RSA private key file:
\OpenSSL-Win32\bin\openssl.exe rsa –in <client_cert>.pem –out <
client_cert>_rsa.pem
previous step.
6. In Notepad:
a. Open both the original .pem file and the RSA .pem file you just created. The RSA .pem file
contains only an RSA private key. Because the Tera2 PCoIP Zero Client certificate requires
its private key in RSA format, you need to replace its private key with this RSA private key.
b. Copy the entire contents of the RSA .pem file (everything from
KEY -----
replacing its private key with this RSA private key.
© 2020 Teradici
Convert the Certificate Format from .pfx to .pem
file to a location where it can be accessed by the Windows 2008 server and
C:\OpenSSL-Win32\bin\openssl.exe pkcs12 ‑in
where is the name of the .pem certificate file you created in the
to
-----END RSA PRIVATE KEY-----
https://www.slproweb.com/products/
C:\OpenSSL-Win32\bin
where is the name of the .pfx
), and paste it into the original .pem file,
directory.
-----BEGIN RSA PRIVATE
C:
350