Table of Contents
Advertisement
Parameter
Endpoint Manager
Topology
Endpoint Bootstrap
Manager URI
Configuring SLP Discovery
Enable Service Location Protocol (SLP) discovery so that SLP management entities can
dynamically discover devices without requiring prior knowledge of their network configuration.
Devices must reside on the same subnet
• Teradici recommends configuring DHCP Vendor Class Options directly in the DHCP server to discover PCoIP
endpoints
• SLP discovery requires all PCoIP devices to reside on the same network subnet. For SLP discovery to work across
subnets, you must configure routers to forward multicast traffic between subnets.
You enable SLP discovery from the OSD and AWI Discovery pages, shown next:
© 2020 Teradici
Configuring SLP Discovery
Description
When the client has been automatically discovered by an Endpoint Manager, this section
displays information about the connection.
If the client used manual discovery, this information does not display.
• URI Type: Displays whether the client is connected to an internal Endpoint Manager or
an external one.
• Endpoint Manager URI: Displays the URI (uniform resource identifier) for the Endpoint
Manager the client is currently using.
• Certificate Fingerprint: Displays the certificate fingerprint (digital signature) that was
used to authenticate the Endpoint Manager.
This field displays when the discovery mode is set to Manual.
Enter the URI for the Endpoint Bootstrap Manager the client will connect to for bootstrap
information using the following format, and click Apply:
wss://<EBM IP address/FQDN>:[port number]
This URL requires a secured WebSocket (wss://) prefix. The PCoIP Management Console's
listening port is 5172. Entering this port number is optional. If you do not include it, port
5172 will be used by default.
261
Advertisement
Table of Contents
