Table of Contents
Advertisement
Ensure that the syslog server can manage the volume of messages
Ensure that your syslog server can handle the volume of messages that the Tera2 PCoIP Zero Client sends. With
certain free syslog servers, messages are lost if the volume is too great.
The following syslog settings display on the AWI Event Log page:
Syslog Parameters
Parameter
Enable Syslog
Identify Syslog Host By
Syslog Host IP Address
/ Syslog Host DNS
name
Syslog Host Port
© 2020 Teradici
Enabling Syslog
Description
Enable or disable the syslog standard as the logging mechanism for the device.
You must configure all fields when syslog is enabled.
If you enable syslog, you must configure the remaining fields. If you disable syslog, you
can't edit the fields.
Choose if the syslog server host is identified by its IP address or by its Fully Qualified
Domain Name (FQDN).
The parameter that displays depends on which option you choose to identify the
syslog server host:
• IP Address: Enter the IP address for the syslog server host.
• FQDN: Enter the DNS name for the syslog server host.
If you enter an invalid IP address or DNS name, a message displays to prompt you to
correct it.
Enter the port number of the syslog server. The default port number is 514.
364
Advertisement
Table of Contents
