Table of Contents
Advertisement
INSTALLATION STEPS
1. Connect USB keyboard and mouse.
2. Connect one end of the Ethernet cable to the zero client and the other end to a switch/router.
The switch or router should be on the same network as the Remote Workstation Card or
virtual desktop server.
For more advanced network environments, visit the
3. Connect monitor cables to the zero client.
4. Connect speakers and/or headphones (optional).
5. Connect power supply to the zero client and a power source.
6. Press front panel button to power on the zero client.
BUTTON OPERATION
• Press to turn on (when off or in WoL/WoUSB suspend mode)
• Press and hold to turn off
• When in-session
• When connected to a virtual desktop - Press to disconnect.
• When connected to a PCoIP Remote Workstation Card - Press to show zero client control
panel with options to disconnect, or power off the workstation.
© 2020 Teradici
PCoIP Zero Client Quick Start Guide
Teradici Support Site
450
Advertisement
Table of Contents
