Wacom Cintiq Pro 32 Manual page 215

SCEP Parameters
Parameter
SCEP Server URL
Challenge
Password
Root CA
Client Certificate
Request
Certificates
Status
To obtain certificates automatically from a SCEP server:
1. Open the SCEP page:
• From the OSD, select Options > Configuration > SCEP.
• From the AWI, select Configuration > SCEP.
2. Enter the URL and password for the SCEP server.
3. To retrieve the certificate, click Request Certificates. The Root CA and 802.1x certificates display
after these certificates are installed.
4. To save your updates, click OK from the OSD, or click Apply from the AWI. The Status section
displays the status of the request (for example, in progress, successful, or failed).
© 2020 Teradici
Obtaining Certificates Automatically Using SCEP
Description
Enter the URL for the SCEP server that is configured to issue certificates for the device.
Enter the password to present to the SCEP server.
Displays the name of the root CA certificate that has been installed in the device.
Displays the name of the client certificate that has been installed in the device.
After entering the SCEP server address and password, click this button to retrieve
certificates.
Displays the status of the request (for example, in progress, successful, failed).
215