Wacom Cintiq Pro 32 Manual page 41

Configuring Initial Setup Parameters
Before you use your Tera2 PCoIP Zero Client for the first time, you need to configure initial setup
parameters, including setting basic audio, network, and session information.
You can perform this initial setup from the AWI Initial Setup page, shown next.
AWI Initial Setup page
The following parameters display on the AWI Initial Setup page:
Audio Parameters
Category Parameter
Audio Enable HD Audio
Network Enable DHCP
IP Address
© 2020 Teradici
Configuring Initial Setup Parameters
Description
Enables audio support on the client
Enables DHCP (as opposed to using manual IP address configuration)
Device's IP address
41