Table of Contents
Advertisement
Category
Parameter
Audio Device Type
Preferred USB
Device Vendor ID
Preferred USB
Device Product ID
Attached USB
devices (AWI only)
To configure audio settings:
1. Open the Audio page:
• From the OSD, select Options > Configuration > Audio.
• From the AWI, select Configuration > Audio.
2. From the OSD or AWI Audio page, update the audio settings.
3. To save your updates, click OK from the OSD, or click Apply from the AWI.
© 2020 Teradici
Configuring Audio
Description
This field applies when you enable the Enable Local USB Audio Driver option and
both an analog output device and a USB output device are connected to the
Tera2 PCoIP Zero Client. Since you can use only one audio device at a time
when devices are locally terminated, select the type of device you want to use:
• Analog: The analog output device plugged into the analog input jack on
the Tera2 PCoIP Zero Client will be used for audio playback.
• USB: The USB output device attached to the Tera2 PCoIP Zero Client will
be used for audio playback. If more than one is attached, the Audio
Output options enable you specify the preferred one to use.
This field is automatically populated with the USB device's vendor ID (VID)
after you select the preferred audio output device in the Attached USB devices
list and apply your changes. You can also manually enter the VID of the
preferred attached USB device.
This option doesn't apply to analog audio devices.
This field is automatically populated with the USB device's product ID (PID)
after you select the preferred audio output device in the Attached USB devices
drop-down list and apply your changes. You can also manually enter the PID
of the preferred attached USB device.
This option doesn't apply to analog audio devices.
In the list, select the preferred USB device to use for audio output.
254
Advertisement
Table of Contents
