Wacom Cintiq Pro 32 Manual page 297

To configure the security level:
1. From the AWI, select Configuration > Management.
2. From the AWI Management page, set the Security Level setting to one of the following:
• Low: Discoverable by endpoint managers. This is the only security mode where certificates
are optional.
• Medium: Not discoverable by endpoint manager, and the installed certificate must trust the
endpoint bootstrap manager.
• High: Not discoverable by endpoint managers, and the bootstrap phase is disabled. All
endpoint manager connection configuration is manual. The installed certificate must trust
the endpoint manager.
3. Click Ok.
© 2020 Teradici
Configuring the Security Level
297