Table of Contents
Advertisement
Parameter
Identity
Client Certificate
Enable 802.1X
Support for Legacy
Switches (AWI only)
To configure network settings:
1. Open the Network page:
• From the OSD, select Options > Configuration > Network.
• From the AWI, select Configuration > Network.
2. From the OSD or AWI Network page, configure the network settings.
3. To save your updates, click OK from the OSD, or click Apply from the AWI.
© 2020 Teradici
Configuring IPv4 Network Settings
Description
Enter the identity string used to identify your device to the network. Should be the
Common Name (CN ) or subject name (SN ) of the 802.1x certificate entered in the Client
Certificate field.
Click Choose to select the client certificate you want to use for your 802.1x devices. The list
of certificates that appears includes the certificates uploaded from the Certificate Upload
page that contain a private key. The certificate you choose from the Network page is linked
to the read-only Client Certificate field on the Certificate Upload page.
Note: 802.1x client certificate must contain all security details
PCoIP only supports one 802.1x client certificate. Ensure your security details are all
contained within the one file. The 802.1x certificate must contain a private key.
When enabled, enables greater 802.1x compatibility for older switches on the network.
279
Advertisement
Table of Contents
