Table of Contents
Advertisement
Parameter
Enable
Configuration
Display Layout
Alignment
© 2020 Teradici
Description
Enable to configure a device that supports two displays per PCoIP chipset.
Select the layout for the displays (A and B). This setting should reflect the physical layout of the
displays on the desk.
• Horizontal: Select to arrange displays horizontally, as indicated in the diagram.
• Vertical: Select to arrange displays vertically, as indicated in the diagram.
Select how you want displays aligned when they are different sizes.
Note: This setting affects which area of the screen to use when users move the cursor from one display to
the other.
The alignment options that appear in the drop-down list depend on the selected display layout.
Horizontal layout:
• Top: Select to align displays at the top. With this setting, use the top area of the screen when
navigating between displays of different sizes.
• Center: Select to horizontally center displays. With this setting, use the center area of the
screen when navigating between displays of different sizes.
• Bottom: Select to align displays at the bottom. With this setting, use the bottom area of the
screen when navigating between displays of different sizes.
Vertical layout:
• Left: Select to align displays on the left. With this setting, use the left area of the screen
when navigating between displays of different sizes.
• Center: Select to vertically center displays. With this setting, use the center area of the
screen when navigating between displays of different sizes.
• Right: Select to align displays on the right. With this setting, use the right area of the screen
when navigating between displays of different sizes.
Configuring Two Displays
333
Advertisement
Table of Contents
