Wacom Cintiq Pro 32 Manual page 393

Parameter
Connection
State
Peer IP
Peer MAC
Address
To manually disconnect from or connect to a session:
1. From the AWI, select Diagnostics > Session Control.
2. From the AWI Session Control page, you can:
• View the connection status.
• Click Connect to initiate a PCoIP session.
• Click Disconnect to end the PCoIP session.
© 2020 Teradici
Description
This field displays the current state of the session. Options include the following:
• Disconnected
• Connection Pending
• Connected
Two buttons appear below the Connection State field:
• Connect: If the connection state is Disconnected, click this button to initiate a PCoIP session
between the client and its peer device. If the connection state is Connection Pending or
Connected, this button is disabled.
• Disconnect: If the connection state is Connected or Connection Pending, click this button to end
the PCoIP session for the device. If the connection state is Disconnected, this button is
disabled.
Peer IP Address: Displays the IP address for the peer device. When not in session, this field is
blank.
Peer MAC Address: Displays the MAC address of the peer device. When not in session, this field is
blank.
Controlling Sessions
393