Wacom Cintiq Pro 32 Manual page 119

Table of Contents

Advertisement

Parameter
Enable Session
Disconnect
Hotkey
PCoIP Utility
Bar Mode
Session
Negotiation
Cipher Suites
© 2020 Teradici
AWI: PCoIP Connection Manager Session Settings
Description
When enabled, users can press the Ctrl+Alt+F12 hotkey sequence to pop up the 'Zero Client
Control Panel' overlay, which lets them disconnect the current session on the workstation or
power off the workstation.
Before users can use this disconnect hotkey sequence, certain other configuration options
must be in place. See Disconnecting from a Session for details.
When enabled, the PCoIP Utility Bar appears at the top of the primary display when a user is in
session and moves the cursor directly under the bar. The utility bar can be used to disconnect a
session or to shut down a remote workstation. For Direct to Host session connection types,
Local Cursor and Keyboard
mouse events for the utility bar. For all connection types, the mouse must be locally connected
(that is, not bridged).
• Disabled: Disables the PCoIP Utility Bar. By default, the utility bar is disabled.
• Enabled: Enables and auto-hides the PCoIP Utility Bar. Users can show the utility bar by
pointing the mouse at the top of the screen directly under the utility bar. Users can slide the
utility bar to the right and left at the top of the screen.
• Enabled and Pinned: Enables and pins the PCoIP Utility Bar at the top of the screen. Users
cannot hide the utility bar, but they can slide it to the right and left at the top of the screen.
This feature is configurable from the PCoIP Management Console and AWI only. It requires
firmware version 4.2.0 or higher.
Configure the Transport Layer Security (TLS) cipher to use for negotiating the TLS session
between the PCoIP client and the PCoIP host.
• Maximum Compatibility: TLS 1.1 or higher with RSA keys: This option provides maximum
compatibility.
• Suite B: TLS 1.2 with Suite B-compliant 192-bit elliptic curve encryption. This option provides a
higher level of security.
must be enabled in order for the Tera2 PCoIP Zero Client to process
119

Advertisement

Table of Contents
loading

Table of Contents