Wacom Cintiq Pro 32 Manual page 180

Connecting Using Auto Detect
This connection type automatically detects which broker protocol a connection server is using so
users in a mixed environment (for example, one that uses View Connection Servers and PCoIP
Connection Managers) do not have to manually reconfigure the session type each time they
switch brokers.
To connect using Auto Detect connection type:
1. From the Options > Configuration > Session menu on the Tera2 PCoIP Zero Client's OSD, select
the Auto Detect
2. In the Server URI field, enter the FQDN or IP address of one of the following and click OK:
• Your workstation, if you are connecting directly.
• PCoIP Connection Manager, if you are connecting through a third-party broker.
3. Click the Connect button.
4. When prompted, enter your login credentials.
After you make a successful connection using Auto Detect, the IP address or FQDN of your host is
automatically saved in the Server drop-down list on the OSD Connect dialog, along with the IP
address or FQDN of any other hosts to which you have connected.
Connecting Using PCoIP Connection Manager
To connect using the PCoIP Connection Manager connection type:
1. From the Options > Configuration > Session menu on the Tera2 PCoIP Zero Client's OSD, select
the PCoIP Connection Manager
2. In the Server URI field, enter the FQDN or IP address of one of the following and click OK:
• Your workstation, if you are connecting directly.
• PCoIP Connection Manager, if you are connecting through a third-party broker.
3. Click the Connect button.
4. When prompted, enter your login credentials.
© 2020 Teradici
Connecting Using Auto Detect
connection type.
connection type.
180