Wacom Cintiq Pro 32 Manual page 141

Parameter
Auto Connect
Connection
Server Cache
Mode
Auto Launch If
Only One Pool
Use OSD Logo
for Login
Banner
Enable Peer
Loss Overlay
© 2020 Teradici
AWI: View Connection Server + Auto-Logon Session Settings
Description
This field determines the client's auto connect behavior after startup:
Enabled: The client automatically connects with the connection server after startup and a PCoIP
session ends, bypassing the OSD Connect page.
Disabled: The client does not automatically connect with the connection server.
Enabled With Retry On Error: The client will continuously attempt to contact the connection server.
After a connection failure, the client waits before attempting to connect again. This wait time
increases with each successive failure. The wait interval is not configurable.
Devices running firmware 4.1.1 or lower do not support Retry On Error behavior and will always
perform a single attempt to contact the connection server when this option is selected.
After enabling Auto Connect, the client must be power-cycled for the change to take effect.
This field determines whether a connection server is dynamically added to the Server drop-down
menu on the OSD Connect page when a user types in a valid server URI, or whether it appears in
a read-only list for the user to select.
• Last servers used: Select this option if you want a list of cached servers that a user has typed
in to appear in the Server drop-down menu on the OSD Connect page.
• Read-only: Select this option if you want users to select a connection server from a read-only
list.
You can use the PCoIP Management Console to pre-populate the list of available connection
servers.
When enabled, users are automatically connected to a provisioned desktop or application after
user credentials are entered.
For Tera2 PCoIP Zero Clients, this parameter is called Auto Launch If Only One Desktop.
This feature only applies to users who are entitled to a single desktop. It does not apply to users
entitled to multiple virtual desktops.
When enabled, the OSD logo banner appears at the top of login screens in place of the default
banner.
When enabled, the 'Network Connection Lost' overlay appears on the display(s) when a loss of
network connectivity is detected. Normal hypervisor scheduling delays can falsely trigger this
message.
141