Table of Contents
Advertisement
Logging into the Administrative Web Interface
To log into the Administrative Web Interface (AWI) web page:
1. Using a web browser, enter the client's IP address in the address bar. According to network
requirements, this address may be either a static or dynamic address as follows:
• Static IP Address: The IP address is hard-coded and must be known.
• Dynamic IP Address: The Dynamic Host Configuration Protocol (DHCP) server dynamically
assigns the IP address. You can get it from the DHCP server.
2. From the Log In page, enter the administrative password.
Contact your reseller for your device's AWI password
Contact your reseller to obtain the default password for your device's AWI.
AWI Log In page
3. To change idle timeout (the time after which the device is automatically logged off), select an
option from the Idle Timeout drop-down menu.
4. Click Log In.
© 2020 Teradici
Logging into the Administrative Web Interface
20
Advertisement
Table of Contents
