Table of Contents
Advertisement
Configuring IPv4 Network Settings
Setting
Enable DHCPv4
IP Address
Subnet Mask
Gateway
Primary DNS Server
Secondary DNS Server
Domain Name
FQDN
Ethernet Mode
Maximum MTU Size
Enable 802.1X security
Identity
Authentication
Client Certificate
Enable 802.1X Support for Legacy Switches
From the OSD and AWI Network pages, you can manually configure network settings if DHCP is
disabled, as well as configure 802.1x security to ensure that only authorized devices access the
network.
© 2020 Teradici
Configuring IPv4 Network Settings
Default
AWI
Enabled
Auto
1200 bytes
TLS
OSD
Management Console
273
Advertisement
Table of Contents
