Table of Contents
Advertisement
About Tera2 PCoIP Zero Client Security Level
Settings
The Discovery Mode setting described in this article is found on the Management page and
configures how endpoint managers are discovered by the Tera2 PCoIP Zero Client.
Discovery in this context does not refer to discovery of the Tera2 PCoIP Zero Client by endpoint
managers. For instructions on having an endpoint manager discover your Tera2 PCoIP Zero Client,
see
Endpoint Manager Discovery
There are three available security level settings in the Tera2 PCoIP Zero Client: low, medium, and
high. These settings determine whether theTera2 PCoIP Zero Client can be discovered by an
endpoint manager, how an endpoint manager can be discovered by the Tera2 PCoIP Zero Client,
and also dictate whether a certificate must be installed in the Tera2 PCoIP Zero Client for
discovery to succeed.
The security level is configured on the Management page of the OSD or AWI (see
Security
Level). Detailed instructions for allowing discovery under most scenarios, including
security level settings, are described in
The general implications of each security mode are summarized in the following table and
described in detail next.
Tera2 PCoIP Zero Client behavior in low, medium, or high security modes and using automatic or manual
discovery modes
Can be discovered by endpoint managers
Can automatically discover endpoint
managers using DNS
© 2020 Teradici
About Tera2 PCoIP Zero Client Security Level Settings
Methods.
Endpoint Manager Discovery
Low
Security
Automatic
Methods.
Low
Medium
Security
Security
Manual
Automatic
Configuring
Medium
High
Security
Security
Manual
Manual
197
Advertisement
Table of Contents
