Wacom Cintiq Pro 32 Manual page 204

Discovering the Client Manually from the Endpoint Manager
Endpoint managers can be configured to discover endpoints like the Tera2 PCoIP Zero Client. This
discovery method requires configuration on both the Tera2 PCoIP Zero Client and the endpoint
manager.
To configure the Tera2 PCoIP Zero Client to be discoverable by an endpoint manager:
1. From the AWI, select Configuration > Management. The AWI Management page displays.
2. Set the Security Level option to Low.
3. Set the Manager Discovery Mode to Automatic.
4. Click Apply.
After the Tera2 PCoIP Zero Client is discovered, the endpoint manager topology appears on the
Management page.

Initiating discovery from the PCoIP Management Console
For more information about initiating discovery from the PCoIP Management Console, see the
Console Administrators'
Discovering the Endpoint Manager Manually from the Client
Using Low or Medium Security Mode
In low or medium security modes, you can manually discover the endpoint manager by manually
providing the URI for its bootstrap server.

Manual discovery requires a certificate
When manual discovery mode is used, DNS cannot be used to trust the endpoint manager. The Tera2 PCoIP Zero
Client must have been previously provisioned with a certificate using an endpoint manager.
For more information, see
© 2020 Teradici
Discovering the Client Manually from the Endpoint Manager
Guide.
Staging Clients Using an Endpoint Manager.
PCoIP® Management
204