Table of Contents
Advertisement
Connecting to a Session Using Smart Cards
Users can connect to a session using smart cards when connected to VMware View virtual
desktops or a PCoIP Connection Manager that supports this feature.
This section addresses using smart cards when connected to a PCoIP Connection Manager.
Before connecting to a session using a smart card, connect the USB smart card reader into the
Tera2 PCoIP Zero Client.
While the network connection is initializing, various status messages are displayed to indicate the
progress. If problems are experienced during startup—for example, if the connection cannot be
made—other messages display in this area to indicate the nature of the problem. Once the
connection is established, the local GUI disappears, and the session image appears.
To connect to a session using a smart card:
1. Insert a supported smart card into a supported USB smart card reader. The Connect window
appears. The Connect window may differ slightly depending on your configuration: for
example, the User name and Domain fields may be read-only.
2. If required, type your credentials.
© 2020 Teradici
Connecting to a Session Using Smart Cards
163
Advertisement
Table of Contents
