Connecting to an Endpoint Manager
Tera2 PCoIP Zero Clients are managed in groups by an endpoint manager, such as the PCoIP
Management Console. Endpoint managers are also the recommended method to configure your
zero client to maintain a high security environment.
Before the endpoint manager can administer a client, the client must see the endpoint manager
and establish a connection to it. This connection process is called discovery. Discovery can be
automatic or manual, and can be initiated from either side; endpoint managers can discover
clients, and clients can discover endpoint managers.
Available discovery methods are determined by your chosen security settings, discovery modes,
and installed certificates, as described in the following sections:
•
About Tera2 PCoIP Zero Client Security Levels
•
About Certificates
•
Endpoint Manager Discovery Methods
•
Staging Clients Using an Endpoint Manager
© 2020 Teradici
Connecting to an Endpoint Manager
196