Table of Contents
Advertisement
Disconnecting from a Session
You can disconnect from a virtual desktop session and return to the OSD by pressing the device's
Connect or Disconnect button. However, if a user is in a session with a PCoIP Remote Workstation
Card, pressing this button will display the Zero Client Control Panel overlay, which provides options
to disconnect from the session, to power off the remote workstation, or to cancel the operation.
Zero Client Control Panel
You can select an option from this overlay in a number of ways:
• Continue to tap the Connect or Disconnect button to toggle between options until the desired
one is highlighted, then wait for the four-second countdown to complete.
• Use the up/down arrow keys on the keyboard to highlight the desired option, and press the
Enter key.
• Type the number of the desired option to select it immediately.
During a session, you can also use a
providing the following options are configured in advance:
•
Enable Session Disconnect Hotkey
View Connection Server page.
© 2020 Teradici
Disconnecting from a Session
Ctrl
+
Alt
+
F12
hotkey sequence to display this overlay,
must be enabled in the advanced options on the Session –
192
Advertisement
Table of Contents
