Table of Contents
Advertisement
Parameter
Subnet Mask
Gateway
Primary DNS Server
Secondary DNS
Server
Domain Name
FQDN
© 2020 Teradici
Configuring IPv4 Network Settings
Description
The device's subnet mask. If DHCP is disabled, you must set this field to a valid subnet
mask. If DHCP is enabled, you cannot edit this field.
Warning: Take care when setting the subnet mask
It is possible to configure an invalid IP address/subnet mask combination (for example,
invalid mask) that leaves the device unreachable. Take care when setting the subnet mask.
The device's gateway IP address. If DHCP is disabled, this field is required. If DHCP is
enabled, you cannot edit this field.
The device's primary DNS IP address. This field is optional. If the DNS server IP address is
configured when using a connection manager, the connection manager address may be
set as an FQDN instead of an IP address.
The device's secondary DNS IP address. This field is optional. If the DNS server IP address
is configured when using a connection manager, the connection manager address may be
set as an FQDN instead of an IP address.
The domain name of the device (for example, domain.local). This field is optional.
The fully qualified domain name for the device. The default is pcoip-portal- where is the
device's MAC address. If used, the domain name is appended (for example, pcoip-
portal-.domain.local). This field is read-only on this page.
To use the FQDN feature, the DNS server with DHCP option 81 must be available and
properly configured.
277
Advertisement
Table of Contents
