Wacom Cintiq Pro 32 Manual page 227

Displaying an OSD Logo
From the AWI, you can upload an image to display on the OSD Connect page.
After you've uploaded an image, you can configure the image to display on OSD login screens
(instead of the default banner). You can do this if you've configured your Tera2 PCoIP Zero Client
to use a PCoIP Connection Manager as the PCoIP session broker, or a View Connection Server as
the broker when connecting to a VMware desktop.
Displaying a Logo on the OSD Connect Page
From the OSD Logo Upload page, as shown next, you can upload an image to display on the OSD
Connect page.
To display a logo on the OSD Connect page:
1. From the AWI, select Upload > OSD Logo.
2. From the OSD Logo Upload page, click Browse to search for a logo file. The file must be on a
local or accessible network drive.
The 24 bpp (bits per pixel) image must be in BMP format, and its dimensions cannot exceed
256 pixels in width and 64 pixels in height. If the file extension is incorrect, an error message
displays.
3. Click Upload to transfer the specified image file to the client. A message confirming the upload
displays.
© 2020 Teradici
Displaying an OSD Logo
227