Wacom Cintiq Pro 32 Manual page 171

If the desktop is available, a message displays on the Connect screen to inform the user that the
server is preparing the desktop. After a few seconds, the PCoIP session is established and the
user connected.
If the desktop is not available (for example, if the desktop is in the process of rebooting), a second
message also flashes on the Connect screen to inform the user that the assigned desktop source
for this desktop is not currently available. The firmware continuously attempts to connect until the
desktop is ready or the user clicks Cancel to cancel the operation.
If a PCoIP Connection Manager provides the estimated remaining time to connect to a user's
desktop, the zero client will display the remaining time to the user.
Notification with estimated length of time before connecting

Uploading certificates to a single device
For information on how to upload certificates to a single device using the AWI, see

OSD messages on startup or after a session has been established
For information on other OSD messages that may appear on top of a user's session during startup or after a session
has been established, see
© 2020 Teradici
Connecting to a Desktop
About Overlay Windows.
Uploading Firmware.
171