Table of Contents
Advertisement
Parameter
Identify NTP
Host by (AWI
only)
NTP Host Port
(AWI only)
NTP Query
Interval (AWI
only)
Time Zone
Enable Daylight
Saving Time (AWI
only)
To configure time settings:
1. Do one of the following:
• From the OSD, select Options > User Settings > Region.
• From the AWI, Configuration > Time.
2. From the OSD Region page or the AWI Time page, update the time settings.
3. To save your updates, click OK from the OSD, or click Apply from the AWI.
Server address overrides manually configured server
If the device is configured for DHCP and the DHCP server provides an NTP server address, this address will override
any manually configured NTP server. It will also enable NTP if it is.
© 2020 Teradici
Description
Select if the NTP host is identified by IP address or by Fully Qualified Domain Name (FQDN). If
NTP is disabled, this field is not required and is not editable. If you enter an invalid IP address
or DNS name, a message appears to prompt you to correct it. The parameter depends on
which method you choose.
• IP Address: Shows the NTP Host IP address
• FQDN: Shows the NTP Host DNS name.
Configure the port number of the NTP server. The default NTP server port value is 123.
Configure the query interval. The first field is for the interval period and the second field is for
the time unit in minutes, hours, days, or weeks.
Select the local time zone.
Enable or disable the automatic adjustment for Daylight Saving Time (DST).
Configuring Time Settings
319
Advertisement
Table of Contents
