Wacom Cintiq Pro 32 Manual page 219

The following parameters display on the OSD Label page:
OSD Label Parameters
Parameter
PCoIP Device
Name
PCoIP Device
Description
Generic Tag
To assign a device name from the OSD:
1. From the OSD, select Options > Configuration > Label.
2. From the OSD Label page, enter a device name, a description, and additional information (if
necessary).
3. Click OK.
Assigning a Device Name from the AWI
You can assign a device name from the AWI Label page, shown next.
© 2020 Teradici
Assigning a Device Name from the AWI
Description
Lets you give the device a logical name. The default is pcoip-portal-<MAC>, where <MAC> is
the device's MAC address.
This field is the name the device registers with the DNS server if DHCP is enabled and the
system is configured to support registering the hostname with the DNS server.
It's important to ensure that the PCoIP Device Name is unique for each endpoint in the
network and follows these naming conventions:
• The first and last character must be a letter (A-Z or a-z) or a digit (0-9).
• The remaining characters must be letters, digits, hyphens, or underscores.
• The length must be 63 characters or fewer.
A description of the device or other information, such as the location of the device's endpoint.
The firmware does not use this field. It is provided for administrator use only.
Generic tag information about the device.
The firmware does not use this field. It is provided for administrator use only.
219