Table of Contents
Advertisement
b. From the General tab, enter a name for the template (for example, PCoIP Zero Client 802.1x)
and change the validity period to match the organization's security policy.
c. From the Request Handling tab, select Allow private key to be exported.
d. From the Subject Name tab, select Supply in the request.
e. From the Security tab, select the user who will be requesting the certificate, and give
Enroll permission to this user.
f. Click OK and close the Certificate Templates Console window.
6. From the Certification Authority window, right-click Certificate Templates, select New, and then
click Certificate Template to Issue.
7. Select the certificate you just created (that is, PCoIP Zero Client 802.1x), and then click OK. The
template will now appear in the Certificate Templates list.
8. Close the window.
Issue the Client Certificate
From the CA Web Enrollment interface for the certificate server, issue the client certificate.
To issue the client certificate:
Use Internet Explorer to log in to certificate server
Do not use any other browser except Internet Explorer to log into the certificate server.
1. Using Internet Explorer on your local machine, go to your Certificate Authority URL using the
format https:///certsrv/ (for example, https://ca.domain.local/certsrv/).
2. Click Request a certificate and then click advanced certificate request.
3. Click Create and submit a request to this CA.
4. From the pop-up window, click Yes.
5. Fill out the Advanced Certificate Request form as follows:
a. In the Certificate Template section, select the certificate for clients (for example, Zero
Client 802.1x).
© 2020 Teradici
Issue the Client Certificate
348
Advertisement
Table of Contents
