Table of Contents
Advertisement
AWI PCoIP Processor page
To view and reset PCoIP processor information from the AWI:
1. From the AWI, select Diagnostics > PCoIP Processor.
2. From the AWI PCoIP Processor page, you can:
3. View the current time, as well as the time elapsed since the Tera2 PCoIP Zero Client's PCoIP
processor last re-booted.
You must enable Network Time Protocol for the current time to display
For the current time to display, you must enable Network Time Protocol (NTP) and configure NTP parameters.
To enable and configure NTP, see Configuring Time Settings.
4. Click Reset to start collecting fresh statistics.
© 2020 Teradici
Viewing and Resetting PCoIP Processor Statistics from the AWI
388
Advertisement
Table of Contents
