Table of Contents
Advertisement
Category
Parameter
Audio Device Type
Preferred USB
Device Vendor ID
Preferred USB
Device Product ID
Attached USB
devices (AWI only)
Audio
Output
© 2020 Teradici
Configuring Audio
Description
This field applies when you enable the Enable Local USB Audio Driver option and
both an analog input device and a USB input device are connected to the
Tera2 PCoIP Zero Client. Since you can only use one audio device at a time
when devices are locally terminated, select the type of device you want to use:
• Analog: The analog input device plugged into the analog input jack on the
Tera2 PCoIP Zero Client will be used for audio recording.
• USB: The USB input device attached to the Tera2 PCoIP Zero Client will be
used for audio recording. If more than one is attached, the Audio Input
options let you specify the preferred one to use.
This field is automatically populated with the USB device's vendor ID (VID)
after you select the preferred audio input device in the Attached USB devices list
and apply your changes. You can also manually enter the VID of the preferred
attached USB device.
This option doesn't apply to analog audio devices.
This field is automatically populated with the USB device's product ID (PID)
after you select the preferred audio input device in the Attached USB devices
drop-down list and apply your changes. You can also manually enter the PID
of the preferred attached USB device.
This option does not apply to analog audio devices.
In the list, select the preferred USB device to use for audio input.
This option doesn't apply to analog audio devices.
The options in this section enable you to specify the preferred device to use
for audio output (playback). The options are available when you select Enable
Local USB Audio Driver.
253
Advertisement
Table of Contents
