Connecting Peripherals - Wacom Cintiq Pro 32 Manual

Setting Up Your Tera2 PCoIP Zero Client
This section describes how to connect your Tera2 PCoIP Zero Client to the network. You'll also
learn how to configure initial setup parameters, as well as secure your Tera2 PCoIP Zero Client so
that you can establish a successful PCoIP session.
The topics include:
• Enabling the AWI
• Connecting the Tera2 PCoIP Zero Client to the Network
• Configuring Initial Setup Parameters
• Securing Your Tera2 PCoIP Zero Client
• Reset Notification

Connecting Peripherals

1. Connect USB keyboard and mouse.
2. Connect one end of the Ethernet cable to the zero client and the other end to a switch/router.
The switch or router should be on the same network as the Remote Workstation Card or
virtual desktop server. For more advanced network environments, visit the
support site.
3. Connect monitor cables to the zero client.
4. Connect speakers and/or headphones (optional). Connect power supply to the zero client and
a power source.
Press the front panel PCoIP button to power on the zero client after your peripherals are connected
to the zero client.
Reset Notification
You can have your PCoIP Zero Client display a pop up message that notifies you that your PCoIP
Zero Client is about to restart. This feature is beneficial when performing a remote configuration
© 2020 Teradici
Setting Up Your Tera2 PCoIP Zero Client
Teradici technical
37