Uploading Firmware - Wacom Cintiq Pro 32 Manual

Uploading Firmware

You can upload new firmware to your Tera2 PCoIP Zero Client from the AWI Firmware Upload
page as shown next.
AWI Firmware Upload page
The following parameters display on the AWI Firmware Upload page:
Firmware Upload Parameters
Parameter
Firmware build
filename
Upload
To upload a firmware release to a client:
1. From the AWI, select Upload > Firmware.
2. Click Browse to browse to the folder containing the firmware file. The file will have an
extension.
© 2020 Teradici
Description
The filename of the firmware image to be uploaded. You can browse to the file using the Browse
button. The file must be on a local or accessible network drive. The firmware image must be an
file.
.all
Click Upload to transfer the specified file to the device. The AWI prompts you to confirm this
action to avoid accidental uploads.
Uploading Firmware
.all
208