Wacom Cintiq Pro 32 Manual page 258

To view discovery information:
1. From the OSD, select Configuration > Management.
2. From the OSD Management page, view the Manager Discovery Mode setting. The setting will
be one of the following:
• Automatic: When this option is set, the client attempts to receive the Endpoint Bootstrap
Manager connection information from a DHCP server or DNS server.
• Manual: When this option is set, the user provisions the Endpoint Bootstrap Manager in the
Endpoint Bootstrap Manager URI field.
3. Click OK.
Configuring the Discovery Method
Using the AWI Management page (shown next), you can configure the discovery method to use.
The information that displays on the page depends on whether the client uses automatic or
manual discovery.
AWI Management page – automatic discovery mode
© 2020 Teradici
Configuring the Discovery Method
258