Wacom Cintiq Pro 32 Manual page 226

2. From the OSD or AWI Reset page, click Reset. When you click Reset, a prompt appears to
confirm you want to reset the parameters.
Configuring a Reset Shortcut
From the AWI, you can enable a keyboard shortcut (
Tera2 PCoIP Zero Client's parameters to its factory default values. When enabled, you can use the
shortcut to automatically reset device parameters.
You enable the shortcut on the AWI Reset page. After you enable the shortcut, you can choose to
display or hide the shortcut on the OSD Reset page. If you choose to hide the shortcut on the OSD
page, you can still use the shortcut to reset parameters.
To enable the reset keyboard shortcut:
1. From the AWI, select Configuration > Reset Parameters.
2. From the AWI Reset page, do the following:
• To enable the shortcut, select the Enable keyboard shortcut check box. When enabled, you
can use the shortcut to automatically reset device parameters.
• To display the shortcut on the OSD Reset page, clear the Hide keyboard shortcut sequence in
OSD check box.
• To prevent the shortcut from displaying on the OSD Reset page, select the Hide keyboard
shortcut sequence in OSD check box. Even though the shortcut doesn't display, you can still
use the shortcut to reset device parameters.
Configuring Remote Reset Notification timeout (seconds)
If a configuration change (AWI or Management Console profile application) requires a PCoIP Zero
Client reboot, the administrator can configure a notification warning of the pending reboot that will
be seen on the monitor. This will allow the user to save any work they may have open.
1. Select either the 30, 60, or 300 second option and apply the setting.
© 2020 Teradici
Configuring a Reset Shortcut
+
Ctrl Alt
+ + ) to reset your
Shift Space
226