Wacom Cintiq Pro 32 Manual page 375

At any given time, you can enable enhanced logging mode for any one of the following categories:
• Audio: Provides enhanced audio-related details, such as audio compression levels and audio
bandwidth. Enable this mode if you experience issues with audio quality.
• Management Console: Provides debug-level details for the connection state between the device
and the PCoIP Management Console. Enable this mode if have issues connecting to or
managing the device using the PCoIP Management Console.
• Networking: Provides socket-level details for a device's network connections. Enable this mode
for network-related issues—for example, if the device can't connect to a peer or broker, or if it
can't obtain an IP address from a DHCP server.
• OneSign: Provides enhanced logging for connections using Imprivata's OneSign Single Sign-On
proximity cards. Enable this mode to see debug-level messages between a device and a
OneSign authentication server.
• Session Negotiation: Provides pre-session messaging details, such as the full feature set
advertised by each device. Enable this mode for low-level session negotiation details.
• SmartCard: Provides debug-level messages for smart cards. Enable this mode if you
experience issues tapping or logging in using a smart card.
• System: Provides heartbeat details about the device, such as ambient temperature. Enable this
mode for system-level issues.
• USB: Provides details of the traffic between the device and any connected USB devices. Enable
this mode if you are experiencing issues with a connected USB device.
• Video: Displays enhanced image-related logging information. Enable this mode for image,
monitor, or display topology issues.
To enable enhanced logging mode:
1. From the AWI, select Diagnostics > Event Log.
2. From the AWI Event Log page, select an enhanced logging mode category.
(To return to normal logging mode, click Disable.)
3. Click Apply.
© 2020 Teradici
Configuring Enhanced Logging Mode
375