Table of Contents
Advertisement
About the PCoIP Administrative Web Interface
The PCoIP Administrative Web Interface (AWI) enables you to interact remotely with a PCoIP
endpoint. From the AWI, you can manage and configure a client, view important information about
it, and upload firmware and certificates to it.
Disabled by default
As of firmware 6.4, the AWI is disabled by default. See
how to enable the AWI.
After you type the device's IP address into an Microsoft Edge, Mozilla Firefox, or Google Chrome
browser, the browser will use HTTPS to connect to the device's AWI web page. Access to the AWI
is controlled using an administrative password, which can be optionally disabled.
The AWI's HTTPS connection is secured using a PCoIP root Certificate Authority (CA) certificate.
To avoid warning messages when you log into the AWI, it is recommended that you install this
certificate in your browser. The certificate file (cacert.pem) is always included in a firmware
release, but you can also download it directly from
warning when accessing the Management Console 2.x and 3.x web interface?
instructions on how to install the certificate are also included in the knowledgebase article.
The following browsers are supported in this release:
• Firefox: current version
• Chrome: current version
• Microsoft Edge: current version
© 2020 Teradici
About the PCoIP Administrative Web Interface
Configuring Access to Management Tools
How do I get the fix the unsecure browser
for instructions on
(1406). Detailed
19
Advertisement
Table of Contents
